REMOVAL

1. REMOVE NO. 2 AIR TUBE HOSE

2. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 1)

3. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 2)

4. REMOVE IGNITION COIL ASSEMBLY

5. REMOVE NO. 3 WATER BY-PASS PIPE

6. REMOVE INTAKE MANIFOLD

7. REMOVE NO. 3 AIR TUBE HOSE

(a) Remove the 3 bolts, No. 3 air tube hose and gasket.

8. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY

9. REMOVE NO. 4 AIR INJECTION SYSTEM HOSE

10. REMOVE AIR PUMP ASSEMBLY

11. REMOVE STARTER ASSEMBLY

12. REMOVE INLET WATER HOUSING

13. REMOVE FRONT WATER BY-PASS JOINT

14. REMOVE REAR WATER BY-PASS JOINT

15. REMOVE OIL COOLER PIPE

16. REMOVE NO. 2 WIRING HARNESS HEAT INSULATOR

(a) Remove the 2 bolts and heat insulator.

17. REMOVE FRONT ENGINE MOUNTING INSULATOR RH

(a) Remove the nut and mounting insulator.

18. REMOVE FRONT ENGINE MOUNTING INSULATOR LH

(a) Remove the nut and mounting insulator.

19. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

(a) Remove the 4 bolts and mounting bracket.

20. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

(a) Remove the 4 bolts and mounting bracket.

21. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH (for Bank 2)

22. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH (for Bank 1)

23. REMOVE VVT SENSOR

24. REMOVE KNOCK CONTROL SENSOR

25. REMOVE CRANKSHAFT POSITION SENSOR

26. REMOVE VENTILATION VALVE SUB-ASSEMBLY